PROCO-PA 11 RILSAN®
The Proco - PA 11 process is particularly suitable for corrosion-resistant coatings on small and complex workpieces.
The high coating thicknesses offer maximum protection against chemical and mechanical stresses and provide warmth of touch (e.g. sports equipment, door handles) as well as an excellent decorative effect.
The behaviour against alkalis, salt solutions, greases, oils and solvents is good, and usually sufficient for chlorinated hydrocarbons, oxidising agents and diluted acids.
Physiologically safe grades approved for contact with food are available.
Processing of PA 12 (VESTOSINT®) on customer request.
PROCO-PA 11 RILSAN® FEATURES
- Smooth surface
- Good sliding properties
- High elasticity
- High corrosion protection
- High insulation value
- High wear resistance
PROPERTIES of PROCO-PA 11 RILSAN®
| Type | PROCO-PA 11 RILSAN® |
|---|---|
| Characteristics: | Thermoplastic |
| Colour shade: | Colour of your choice |
| Layer thickness: | 250 - 500 μm |
| Permissible thermal load, dry: | +100° C (short 140° C) |
| Permissible cold load: | - 55° C |
| Specific weight: | 1.04 g/cm3 |
| Shore hardness: | D 75 |
| Melting point: | 185° C |
| Dielectric strength: | 10 - 40 kV/mm (depending on colour) |
| Thermal conductivity: | 0.25 kcal/m h° C |
| Water absorption: | 0,5 - 1 % |
| Pre-treatment: | Anti-corrosive radiation Sa 3 (DIN EN ISO 12944-4) |
The guidelines of DIN EN 14879-1 apply to the planning and production of structures to be coated.
Application examples for PROCO-PA 11 RILSAN®:
Springs, pump housings, gearbox housings, washing machines and dishwashers, vehicle construction (cardan shafts), dragée boilers, dosing systems, tools, hand wheels, fittings, filter plates, sludge treatment and waste water systems, wire and mesh industry, stamped parts, sports equipment, fittings, internal/external pipework, containers, rotary valves.